How To Build a Custom Bedroom Closet With Sheets of Plywood for $100 | DIY Woodworking

How To Build a Custom Bedroom Closet With Sheets of Plywood for $100 | DIY Woodworking

Learn how to build a custom closet for $100 using two sheet of 3/4in plywood. One sheet for the center shelf and the second sheet for the top and side shelf.

#woodworking #DIY #howtobuild #homeimprovement #closet

This video will show you how to use the space you have to organize and build shelving that fits your needs. The design can be modified to fit most any standard home or bedroom closet. All you need to do is follow the basic building principles and instructions and you can have a custom closet for $100.

DOWNLOAD the Plans:
https://www.etsy.com/MillerFurniture/listing/625778102/build-instructions-for-a-custome-closet

In this video you will use one 3/4in 4’x8′ birch plywood to create this custom bedroom closet. The total cost for this build is about $100. Yep that is right, $100 amazing right. This video will show you the basics of closet shelf building. I believe anyone can build amazing things. If you have any questions about this build please post your comments below. Be sure do download the plans.

Pantry Video – See how I used “Edge Banding” https://youtu.be/tsx6WDIolEI

Here is a link to my blog where I talk a little more about the project. http://www.philipmillerfurniture.com/blog/2018/11/6/how-to-build-a-custom-closet-for-100-diy-woodworking-project

YouTube Copy

Here is a link to my blog where I talk a little more about the project.
www.philipmillerfurniture.com

► SUBSCRIBE FOR MORE VIDEOS | http://bit.ly/2FRGV11

► BECOME A PATREON | http://bit.ly/2G4GZKW

► BE MY FRIEND | Other than YouTube, Instagram is my thing.

Instagram | http://bit.ly/2FRK0y7
Facebook | http://bit.ly/2FVJLSU
Twitter | http://bit.ly/2FV5H0i
Pinterest | http://bit.ly/2FWv6a1

► MY WEBSITE | http://bit.ly/2FUFTBJ

► TOOLS | This is a list of my basics tools that I use for my woodworking and build project. You should be able to make just about everything with these tools.

Miter saw | https://amzn.to/2RuG4oD
Table saw | https://amzn.to/2U1BLCV
DeWalt 20V Drill Set | https://amzn.to/2rfO94X
Bosh Router Kit | https://amzn.to/2rpH8ih
Nail Gun Kit | https://amzn.to/2UdKYIq
Air Compressor | https://amzn.to/2QBvEq8

► GEAR | This is a list of the camera and video gear I use to make my videos.

Main Camera | https://amzn.to/2QDh8y9
Main Lens | https://amzn.to/2KOf3Kg
Secondary Lens | https://amzn.to/2QdsgSY
Audio Camera Mic | https://amzn.to/2SkY5pg
Voice Over Mic | https://amzn.to/2rjjtjs
Lights | https://amzn.to/2Eacl1e
Laptop | https://amzn.to/2Q57cxL
Editing Software | https://amzn.to/2QygbH9

DISCLAIMERS | Some of these links have an affiliate code, if you purchase tools or gear with these links I will receive a small commission at no additional cost to you. This helps cover my build materials. Thank you!

70,808
Like
Save


Comments

Chris Blunt says:

Seems to be kneeling down into all shots when not needed. But funny. Great video btw

Mark W says:

There is no such thing as "kregjigging" moron!!! Stop saying that, you sound stupid!

Glen Con says:

How deep are shelves?

John Mendoza says:

Great video thanks

Mish gee says:

This is exactly my vision I wish I was as handy as you though 😩😔

Paola Corvera says:

I’m doing this! Super cool 😎

funnymom says:

Love it! You make it look so easy 😩 Will give it a shot! Can you do a mud room bench tutorial?! 😁

Chris Parish says:

Nice bruv ill be doing that !

Chuck Kindstrand says:

Nice inexpensive way of bringing a closet to it's full potential. This looks similar to the first closet I remodeled about 5 years ago. Keep it up, looking great!

Edward Walsh says:

Next time why don't you cut away the baseboard from the center section and get it closer to the wall and and re-install the base in the middle of the section to clean up the look. Also.. use "pin rails" for the upper shelf in the back to prevent sagging. Also… you dont show anyone dimensions at all, and you talk way too much.

Edward Walsh says:

So… you don't wear shoes while working in your "garage"?

enjolras56 says:

I purchased the plans. They're easy to follow and modify to your specs. Philip is super helpful in answering questions!

Steven Mak says:

Note to self. Don’t drill the holes all the way through when using the kreg jig 😑😑

Arjun Gupta says:

great video, just a question I need my top to be removable as the attic access is through the closet. I was thinking not to screw it in .. is it advisable ?

Patrick Gosselin says:

If you look closely, around 7:26 he finally came out of the closest. Joking aside, great video! thanks 😀

enjolras56 says:

Can I hang the center shelf column? I have a weird 10" high angled board that juts out about 10" at the bottom. I won't be able to rest the center shelf column on the floor.

Joseph Wulliger says:

He’s hiding the width lmao

alyson testawich says:

how come i’m not able to get the plans ? 😊 says it’s sold

theMattural says:

Great video!

Sa A says:

Who's the dad

Aqua Silvi says:

Tomuch Blabla

Victor Diaz says:

Good job man.
Well done.

Scott Johnson says:

Looks nice!

Madamerie Madamerie says:

Father and son work together,,, what a lovely 😊

Mas Gusur Sangkar says:

What kind of paint you use to painting that plywood?? Waterbased or what?? Thanks before

Нереальная Австралия says:

all looks very good, thanks for sharing!

Luz Amaya says:

Thanks for sharing☺️

Erik Riley says:

Good job, good ideas!!

Kate Blachers says:

You should put voice over the action rather than just a shot of a talking head. eg from 1.00 to 1.36 you should put the voice over the next bit of clip. also get a mic so you dont have to shout

Write a comment