99 – Part 1 – SHED Build Series – “Foundation, Floor and Ground Prep”
My Custom Detailed Plans for most common shed sizes: https://kingsfinewoodworking.com/collections/project-plans-for-sale/products/shed-building-plans
Includes complete materials list and cut list, with all angles and math done for you! Plus these designs maximize material use, giving you the most amount of shed for the least amount of money.
This is a complete video series detailing exactly how to build a shed from beginning to end. It is presented so that even someone with little to no experience can tackle this project. The instruction teaches the UBC (Uniform Building Code) rules that almost every jurisdiction in the United States follows, so you will be prepared if you need a permit. But in many cases a permit isn’t required for a shed under a certain size.
This project takes only basic tools to accomplish. If you have a circular saw, a drill, a level & a hammer, along with some basic hand tools, you can do this.
There are things that will make it quicker of course, such as a nailgun & compressor. But you can decide what level of tools are needed.
I’ve broken the video into digestible parts. This makes it easier to refer back to a specific section. Or, if you only happen to need instruction in one area, this will save you time, since you can just watch what you need.
Here are some of the tools and supplies that I used in building this project:
Circular saw https://amzn.to/2NgTRho
Basic Forstner bit set https://amzn.to/2NcBVom
Drill Bit set https://amzn.to/31J9wvb
Impact driver https://amzn.to/330b5WY
Speed Square https://amzn.to/367j7iZ
Framing square https://amzn.to/2WjpWcD
Chalk Line https://amzn.to/2Pgpc6K
Palm nailer https://amzn.to/32MDGyZ
Level 6-1/2 ft https://amzn.to/2Pk4IKd
Level 4ft https://amzn.to/31ONsj0
16D galv nails https://amzn.to/2NgVJGW
6D galv ring shank nails https://amzn.to/2pe8hqM
TimberLOK screws 6” long https://amzn.to/2BM8nZw
Link to the KFW Community Woodworking group.
Share pictures of your work & get help if needed. Join our King’s Fine Woodworking Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools.
If you would like to help support our channel, there are a number of ways. One way is direct support through Patreon: https://www.patreon.com/KingsFineWoodworking
Another is by purchasing things you might need through our Amazon link. You pay the same and give our channel a small commission. https://www.amazon.com/shop/kingsfinewoodworking
You can also help without spending anything, just by liking and sharing our videos.
Thank you for your support. We love teaching the world to do woodworking.