Chris from http://www.icreatables.com/sheds/sheds-plans.com teaches you how to build walls. This video shows you how to use wall studs and top and bottom plates to frame walls for your storage shed, or anything else you are building. It describes how to:
Mark the stud layout on the top and bottom plates
Crown boards
Nail the walls together
Frame a door or window header
Frame a door opening
Stand the walls and nail them to each other
Nail the walls to the floor
For Shed Plans to this and other sheds please visit our website at
https://www.icreatables.com/sheds/shed-plans.html
For more Shed Building videos check out our YouTube Channel: https://www.youtube.com/user/icreatablestv
Subscribe to the iCreatablestv channel: http://www.youtube.com/subscription_center?adduser=icreatablestv
WARNING: These projects can be dangerous, posing risks of personal injury, or property damage, and in some cases, death. There may be the possibly other risks of which I am not fully aware. Use of video content and or website information is at your own risk.
Thanks for watching!
){kind=link}
How about a list of material and what size shed are you building?
Well done! Thanks for sharing.
How to Build A Shed – Part 1 – The Shed Foundation https://www.youtube.com/watch?v=EXyLx0XVp58
How To Build A Shed – Part 2 – Floor Framing https://www.youtube.com/watch?v=LzBlwKaKKZE
How To Build A Shed – Part 3 – Install Floor Sheeting https://www.youtube.com/watch?v=bTfDZs-f70o
How To Build A Shed – Part 4 – Building Roof Rafters https://www.youtube.com/watch?v=h7fRanWeoUc
How To Build A Shed – Part 5 – Wall Framing https://www.youtube.com/watch?v=DoeEwBJJ5u8
How To Build A Shed – Part 6 – Install Shed Siding https://www.youtube.com/watch?v=3Q8ziLWP_YY
How To Build A Shed – Part 7 – Shed Roof Framing https://www.youtube.com/watch?v=8GMukEPSMmg
How To Build A Shed – Part 8 – Exterior Trim Install https://www.youtube.com/watch?v=ky4WaLv4ZAM
How To Build A Shed – Part 9 – Install Asphalt Shingles On Shed Roof https://www.youtube.com/watch?v=t0wwu-jlY2M
How To Build A Shed – Part 10 – Shed Door Building https://www.youtube.com/watch?v=HOropCvSsds
How To Build A Shed – Part 11 – How To Paint A Shed https://www.youtube.com/watch?v=2DrsMGAZnrg
Make sure u pronounce the 'e' better, sounds like "shit floor"
Could you please tell me the type & dimension of wall plates have used ? Is it (2*4')?
Thanks
How long did this take?
How much did it cost in total for you to build this shed?
What size nails are you using?
I think it's easier and helps steady the wall when you raise it to add the double top plate when you frame the wall .
2 mistakes that ruined this video…1 the studs should be and are nailed at 16 or 24 inches on center.a line at 3/4 of an inch from your 16 or 24 mark will ensure the board the stud is straight… 2nd mistake is there is no mention of squaring the wall before nailing the bottom plate…walls should be squared on the floor and 2×4 nailed diagonally across the wall to hold it square… i hope people watching this video see this and go watch some other video to learn as this video is going to cause a lot of people to have to tear there walls apart and redo them
رائع ..
Hello Mr. ICreatables I'm thinking of building my own shed. I would love to know the size of the shed you built and also a rough estimate of the cost in material… thanks
Sorry. Never measure when you can take actual lumber and mark off of it. It is faster and more accurate.
Why does he say "shit walls"? Haha
What wood did you use
Great and easy video to follow I do have one question, when making the header wouldnt sandwiching the two boards, 2x6s between the osb make it larger than the actual dimention of the 2×4? im not sure maybe i missed something could you please elaborate
what are the dimensions of this here great looking build..much obliged .
is it ok to use …3 inch exterior self drilling star screws for this project instead of nails?..I don't have a nail gun or compressor, but I do have a Porter Cable impact 18 volt impact drill along with a hammer drill…I like the impact wrench, because its quick and it torques damn good.
what was the material cost for this particular shed?
I've done mines the same, thanks…☠️🎸👍
I made a concrete foundation with 4x4s extending vertical in each corner so the wall studs and wall plates came second. It seems to have worked.
这是什么
Hey, talk with Woody Hyezmar, or you can at least download his free plans. If you're starting out that's a way to go about it.
trimmer board? isn't that called a jack stud?
great job on this video.. made it so easy and simple .. broke it down where the steps were necessary. & overall a nice decent sized shed.. would you happen to have the plans to shed, how much did you spent ..