12&#39×24&#39

12'x24' DIY Shed Build (Part 10 – Summary, Materials, & Cost)

Welcome to the final episode of our shed build to summarize the project and discuss materials and cost. This video shows a kind of time lapse of the entire build while I discuss the materials I used for each phase. The beginning of each phase shows a screen shot of a spreadsheet listing the materials […]

346
Like
Save
12'x24' DIY Shed Build (Part 9 – Homemade Double Doors)

Welcome to part 9 of our shed build showing the homemade double doors. In this video we are building and installing our own double doors handcrafted to match the rest of the construction. We used fairly common shed door logic, I think, of locking one door in place with barrel bolts while the other door […]

122
Like
Save
12'x24' DIY Shed Build (Part 8 – Siding Install)

Welcome to part 8 of our shed build showing the LP SmartSide siding installation. In this video we are installing an engineered wood siding product that is pre-primed and ready to paint. This installation was very similar to sheathing the walls with OSB, except that a little more care needed to be taken with placement […]

63
Like
Save
12'x24' DIY Shed Build (Part 4 – Roof)

Welcome to part 4 of our shed build showing the roof framing, sheathing, and papering. The metal roof installation will be shown in a future video. In this video we show the rafter, blocking, and fascia installation, along with the plywood sheathing and synthetic underlayment for the metal roofing. This will be a 12’x24′ wooden […]

1,419
Like
Save
12'x24' DIY Shed Build (Part 3 – Walls)

Welcome to part 3 of our shed build showing the wall framing. We decided not to sheath the walls before standing them, as we had originally intended. We had a few reasons for making this choice: – make them lighter and easier to lift – prevent high winds from pushing too hard before everything is […]

586
Like
Save
12'x24' DIY Shed Build (Part 5 – Wall Sheathing)

Welcome to part 5 of our shed build showing the wall sheathing installation. In this video we show the sheathing of the walls with 4’x8’ OSB (oriented strand board) sheets. We were able to use full sheets on the front (tall) wall, but had to cut them down to about 6’ 6” on the back […]

85
Like
Save
12'x24' DIY Shed Build (Part 1 – Floor)

Welcome to part 1 of our shed build showing the skid foundation and floor system. This will probably be a 3-part series covering floor, walls, and roof. It will be a 12’x24′ wooden shed with a single slope metal roof and either T1-11 or LP SmartSide siding. Making some improvements on the previous two floor […]

421
Like
Save