Please watch: “How to paint plastic car parts to enhance performance”
https://www.youtube.com/watch?v=Za-jyWjMyw0
-~-~~-~~~-~~-~-
Dave shows how to do a full respray and colour change in your back yard.
Using Acrylic paint its safe to spray out in the open.. Using a buff and compound to get a glossy finish.
http://www.facebook.com/pages/Custom-Spray-Mods/109927359116268
http://www.vgautopaints.com.au/
Music:
http://www.youtube.com/DJignyte
http://incompetech.com/
how to paint a car how to paint your car auto paint spray
){kind=link}
Mate, mate mate
Many paint outlets rent out buffers by the day for very reasonable cost.
It's easy to spray the car, but the prep work and removing everything takes a loong time
Great video. the results are nice, but 2 things
1 please wear a mask that shit hurts when it dries in your lungs and can kill you
2 the psi on the spray gun is a tad high
Or in the case of a Camry, just buy another one of the colour you like. Quicker. Cheaper 😀
HOLY ORANGE PEEL! 🍊
I would not trust not using a resperator on any paint the fumes can harm you be safe keeps you out of the emergency room
Do you have to remove all paint ? Or just the clear cost layer?
if you make a mistake and the paint runs in somewhere on the car, don't freak out, you can sand it before spraying the clear coat, and if the clear coat runs at somewhere you can also sand it but all you need is very very high number of grit
Go suscribe to King dopeness
When you buffed, do you sanded and polished base coat, or clear coat?
sanding blocks, respirators, a booth ?come on now
most folks don't realise the hard work prepping, and putting trim back together, Thats why re.sprays are expensive, very time consuming…
Did anyone actually see any primer on that car, I didn't!
That's gonna flake in 2 days, what a bodge job
why wouldnt you show the entire car after its finished??
may i ask what kind of air compressor your running in this video? thanks 🙂
Seriously… you drysprayed the entire clear coat.. I could do a better job with materials for 300usd.
nerver..ever start from bottom up dude..EVER!!!!!!!
What if you want a matte finish?
I'm gonna stick to using crayons.
55 psi is pretty high….