In this video, we use a Raspberry Pi Zero W and a Raspberry Pi camera to make a smart security camera! The camera uses object detection (with OpenCV) to send you an email whenever it sees an intruder. It also runs a webcam so you can view live video from the camera when you are away.
See how we built it, including our materials, code, and supplemental instructions, on Hackster.io: https://www.hackster.io/hackershack/smart-security-camera-90d7bd
Make sure to look out for our behind the scenes video! https://youtu.be/neCsLz-OsyA
USEFUL LINKS:
Follow Hacker Shack on Instagram:
https://www.instagram.com/hackershackofficial/
Subscribe to Hacker Shack: https://goo.gl/qHjz4j
Visit our website for parts and project updates: https://www.thehackershack.com/
View our code on Github: https://github.com/HackerShackOfficial/Smart-Security-Camera
OpenCV Install Guide: http://www.pyimagesearch.com/2016/04/18/install-guide-raspberry-pi-3-raspbian-jessie-opencv-3/
Get our 3D printer: http://robo3d.myshopify.com?rfsn=1004615.c5abe
MATERIALS:
Raspberry Pi Zero Wireless × 1
Amazon Affiliate Link – https://goo.gl/Zsxm7k
Raspberry Pi Camera module × 1
Amazon Affiliate Link – https://goo.gl/4kR632
Check out the NoIR camera for night surveillance
Amazon Affiliate Link – https://goo.gl/fT7oL9
Raspberry Pi Zero Camera Cable x 1
Amazon Affiliate Link – https://goo.gl/pBVZb1
Micro-USB to USB Cable × 1
1/4″ MDF Board × 1
90 Degree Angle Bracket × 1
Outdoor Mounting Tape × 1
M4 X 20mm Long Machine Screws × 2
M4 Hex Nuts × 2
M2.5 Machine Screws × 4
#8 X 3/4″ Long Machine Screws × 1
#8 Hex Nut × 1
#8 Wing Nut × 1
MUSIC:
https://soundcloud.com/joakimkarud
*Disclaimer*
The methods shown in this video should be used
as a guide only.
HACKER SHACK ACCEPTS NO RESPONSIBILITY FOR
ACCIDENTS OR INCIDENTS ARISING FROM INDIVIDUALS
UNDERTAKING ANY OF THE TASKS DESCRIBED. IN
PARTICULAR, IF UNSURE YOU SHOULD ALWAYS CONTACT
A QUALIFIED TRADESMAN BEFORE PROCEEDING.
Is this working/ detect the person in dark places?
can you plz provide me the documentation related to this
i have completed all the setup as shown in above video , but after starting flask server ,in browser by entering raspberrpi ip address : 5000 its asking for user name and password to login what ever the details i given its rejecting can u pls tell me the soulution @Hacker Shack
It seems not to be convenient as motioneye
will a raspberry pi3 work?
Can Anyone give an image with opencv. I am having trouble in downloading opencv from both source and pip
We use a proper POE system for reliability along with the ring doorbells. But I did this for a fun project and I have to admit I am surprised at how well it works, I didn't make a wooden enclosure instead I bought a dummy cctv camera from amazon and built the Raspberry Pi inside of the fake camera.
My favorite part was where you slid your nuts into those holes.
to stream the video browser wants username and password
what username and password should I use?
thank you
does it work with an usb webcam? i dont have the camera module
Don’t want them seeing u?
Cut the cable…
command not found – workon cv. Please any suggestions?
there is a syntax error on missing prentheses in call to print
It is very good