How to repair broken, buried PVC pipes using the smallest hole possible, which is especially useful when space is limited. There is NO NEED for expensive repair couplings! This method I have used for years. Works perfectly when done properly. Using this method will ensure FULL FLOW of water after the repair is complete. No friction loss.
Learn how to MAKE a one piece PVC repair fitting:
Make your own PVC elbows & couplings:
Thanks For Watching!
Support the creation of more electronicsNmore videos:
https://www.patreon.com/electronicsNmore?ty=h
***If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a “THUMBS UP”, and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)***
')){kind=link}
Thanks so much! Thanks to you the when job smoothly and worked.
holy shit I fell asleep! 11 minutes ?? seriously?
why don't you put the coupling first to the pipe if you use a slip coupling
I love it. You just saved me a lot money. Thank u
Great video and you make it look easy! When I tried after removing the stop, on a trial pipe, the coupling won't move at all.
very cool….awesome solution.
HELLO,THAT IS THE WRONG THING TO DO FOR YOU HAVE CREATED A OBSTRUCTION THAT WILL CAUSE SETTAMENT TO GATHER AT THE JOINT ON THE INSIDE AND WILL GLOOG AFTER TIME. NO GOOD!!!!!!!!!!!!!!!!!! HARDWARE STORES ARE OPEN FROM SUN UP AND PAST SUN DOWN GET YOUR FITTINGS THERE AND SAVE YOURSELF PROBLEMS LATER. OH BUT IF YOUR IN INDIA AND YOU CAMMEL IS ASLEEP AND YOU HAVE NO HARDWARE STORE THEN OK!!!!
Dig a deeper hole use platice bag on top of sand while working
You can use the coupling off a 20ft piece of pipe called the bell end just cut it off right were the pipe starts it will have no stop but you would need a 20ft peace of pipe maybe this will help someone
super cool, thanks
I always use a 60 grit paper and I also would of 90 up on both ends about roughly 4 feet and 90 again at the top of the 4 feet and used the "cleaner" to clean the pipes and used silicon caulking to seal off the job. a ok.